Water Garnet Pink 80: pink garnet is mined from sea or river, red and brown garnets are produced from rock. Pink river garnet sand 80 mesh for waterjet cuttingis composed of natural Almandite garnet grains that are known for their natural hardness, durability and abrasive characteristic. It is costeffective alternative to silica sand, mineral slags and steel grits and shot as the perfect symbiosis of grain size, density and hard and hardness/durability creates the optimum abrasive efficiency.

$330.00$550.00 / MT

Advantages in Waterjet Cutting
Garnet comes in two basic forms, crushed and alluvial, the later being roughly similar to sand washed up on riversides. Our garnet for export is produced from our crystalline almandite garnetdeposits. Thank to its sharp edges from crushing, this kind crushed garnet acts more like a sharp cutting tools so that it is superior to alluvial and have been shown to cut better and faster.
Sharper Edges- Due to our Silicon is crushed from almandine rock, it acts more like a sharp cutting tools and can cut faster and more efficiently than alluvial garnet.
Faster Cutting- Crushed and selected from hard rock so that Silicon waterjet grade garnet produces harder and sharper edges than other waterjet abrasives. These characteristics enable ourgarnet more like a hard and sharp cutting tool to finish a faster cutting.
Better Edge quality- According to the cutting material and edge quality requirement, there are various special and proper waterjet grades recommended that enable a better edge quality.
Less Dusty- Silicon garnet has high garnet purity and very low dust. That makes the whole cutting course more smoothly.

Choosing the Proper Mesh or Grade
We offers various grades to match any focusing tube and orifice for any given cutting applications. Choosing the proper mesh, or grade, for the operation is very imperative. Different meshsizes of garnet are designed to pass through different sized nozzles and choosing the wrong grade could be stop a waterjet operation completely. If the garnet grade is too large or coarse, the
granules can jam inside a tube and cause a blockage. Too fine an abrasive have a tendency to“clump”together inside the cutting head and again, have the potential to clog. Or it may inhibit theflow of garnet in the feed tube and not consistently enter the venture of water flow between the jewel and nozzle. If you are not sure which mesh or grade is proper, feel free to Contact Us and wewould like to give you our professional suggestions.
Coarse 60 Mesh
Medium 80 Mesh
Fine 120 Mesh
More fine grades 150 mesh, 180 mesh, 200 mesh, 220 mesh








There are no reviews yet.

Be the first to review “WATERJET GARNET PINK 80”

Your email address will not be published. Required fields are marked *


TDS not uploaded


MSDS not uploaded

Please enter correct URL of your document.


Sharp and efficient

Particle size standard less dust

No heavy metal impurities

7.5 Mohs hardness, Grade 3.0


Scroll to Top